|
|
|
The following are examples of
various system status. Get
to know them and what they mean. |
|
|
With SD Card |
|
 |
|
Normal start up. To
shorten the example it will
actually take over a minute for
the red LED to flash, slow down
and stop flashing.
When all LEDs are off then it's
safe to fly. |
|
| |
|
|
No SD Card |
|
| |
|
 |
|
All LEDs are on. The red
turns off. Then red
flashes 5 times. Then
white turns off. Then
green turns off. |
|
| |
|
| |
|
|
Normal Status |
|
Color |
Red |
White |
Green |
|
Constantly Off |
 |
|
|
|
GPS Strong |
Attitude Good |
Manual |
|
Intermittent |
 |
 |
 |
|
GPS Medium |
Attitude Medium |
Autopilot |
|
Flashing |
 |
 |
 |
|
GPS Weak |
Attitude Weak |
Signal Lost |
|
Constantly On |
 |
-
|
 |
|
Power Alarm |
|
Compass Calibration |
|
|
Compass Calibration Mode |
|
|
|
|
Horizontal
Axis
Calibration |
 |
|
Try to keep the white LED on.
White LED will turn off if you're
not rotating perfectly. |
|
Vertical Axis
Calibration |
 |
|
Try to keep the white LED on.
White LED will turn off if you're
not rotating perfectly. |
|
| |
|
|
After the calibration toggle the
manual / auto switch ten times
to save the data.
If you don't want to save then
toggle the switch once.. |
|
| |
|
| |
|
|
Error Status |
|
|
|
|
LEDs do not go off for than 5
minutes. Unknown error. |
|
| |
|
 |
|
LEDs flash. This is a
failure of the attitude or
controller starting. |
|
| |
|
 |
|
LEDs flash in streamline state.
This is a failure reading the
E-PROM data. |
|
| |
|
|
Restart the system. If the
problem persist then contact
the distributor. |
|
| |
|
| |
|
| |
|
